The new bulkhead KEL-FW is perfect for routing cables with/without connectors at a 90° angle over a large bending radius (max. 150 mm).
The hinged cover of the new bulkhead KEL-FW is firmly connected to the housing by a hinge and is therefore captive. This makes the system very easy and quick to mount. The KEL-FW is first screwed to the enclosure using the two rear holes and then fitted with the required cable grommets. The cover is then folded down, locked in place and screwed to the enclosure using the two front holes.
The KEL-FW is fitted with an integrated seal to achieve the high protection rating of IP65 (when using single hole grommets). An additional flat gasket for wall mounting is included in the shipment.
Cables with and without connectors up to a diameter of 35 mm can be routed and strain-relieved according to EN 62444. Retrofitting and maintenance can be carried out quickly and easily.
| IP rating (EN 60529) | IP65, IP64, IP55, IP54 |
| Flame class | UL94-V0, self-extinguishing |
| Operating temperature | -40 C° to 90 C° |
| Material | Polyamide |
| Mounting options | Screw type mounting |
| Properties | silicone free, halogen free |
| Part No. | 42460 |
| EAN | 4251269332074 |
| Package quantity | 1 |
| Mounting options | Screw type mounting |
| For max. no. of cables | 1 |
| Max. cable diameter | 35 mm |
| Length | 122 mm |
| Width | 100 mm |
| Height | 75 mm |
| Mounting height | 75 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 6.5 mm |
| Suitable for grommets | 1 x KT large |
| Part No. | 42461 |
| EAN | 4251269332081 |
| Package quantity | 1 |
| Mounting options | Screw type mounting |
| For max. no. of cables | 4 |
| Max. cable diameter | 16 mm |
| Length | 122 mm |
| Width | 100 mm |
| Height | 75 mm |
| Mounting height | 75 mm |
| No. of screw holes | 4 |
| Diam. of screw holes | 6.5 mm |
| Suitable for grommets | 4 x KT small |
Convince yourself of the simple and time-saving assembly of our products.
Watch the assembly video!
Always find the right size and the right cable grommets for your cable entry!
These punches can be used to punch the special cut-out shapes for the KEL-FW bulkhead fittings. Available for steel, aluminium and stainless steel.
Split cable grommets for diameters of 1 to 17 and 13 - 35 mm. Suitable for KEL cable entry frames and KVT cable glands.
Split cable grommets for diameters of 1 to 17 and 13 - 35 mm. Suitable for KEL cable entry frames and KVT cable glands. Higher chemical resistance.
Adapter grommets with inner thread based on KT cable grommets.
Blank adapter grommet based on KT grommets for custom interface solutions (e.g. screw mounted hybrid connectors).
Adapter grommet based on KT cable grommets for PushPull connection technology.
Adapter grommet based on KT cable grommets for square flanges with the dimensions 19.8 x 19.8 mm (M23).
KT grommet based flange enclosure for routing preassembled cables in a 90° angle to the enclosure wall. Available as single or double row version.
90° angled bulkhead fitting for routing corrugated cable conduits via conduit connector (FWS-A) or direct pickup (FWS-B).
KT grommet based flange enclosure for routing preassembled cables in a 90° angle to the enclosure wall. Available as single or double row version.
KT grommet based split cable gland for routing pre-terminated cables at a 90° angle to the enclosure wall. Metric thread sizes M32 / M50.
KT grommet based cable entry for standard cut-outs of heavy industrial connectors. Available as single or double row version.
